Dream Maker Spas B6L Series, Owner'S Manual

Page: 18 / 26

FREEZE PROTECTION
DO NOT ALLOW THE SPA TO FREEZE
If the spa is to be stored or transported in temperatures 32 ° F (0 ° C) or lower, it is critical that the unit be fully winterized.
1. The spa itself must be completely emptied.
2. The main drain valve must be in the open position.
3. The drain safety cap must be removed and stored.
4. All screws on the wet end of the pump must be loosened three turns.
5. The filter cartridge element must be removed, dried and stored.
6. The massage jet faces must be removed and stored.
7. The spa must be inverted for at least five minutes to facilitate draining of the internal plumbing.
CLEANING THE SPA
Do not use cleaners or compounds containing harsh abrasives. Also, avoid using heavy-duty rubbing or buffing compounds.
Use a soft liquid cleaner.
CARE OF DELUXE VINYL HARDCOVER
Vinyl coated fabrics are perhaps the most maintenance-free fabrics ever produced and certainly will provide exceptional service
life if given the proper care. Almost all vinyl manufacturers now provide information concerning the necessary cleaning procedures
for their products. In reality, all care maintenance instructions are the same for all coated fabrics regardless of their manufacturing
origin.
Products are now on the market that are manufactured to enhance the beauty and service life of all vinyls. However, by using
methods described below with minimal care and attention, you should enjoy years of satisfaction and pride with any vinyl
coated fabric.
EVERYDAY SOIL
A gentle mixture of any mild soap and warm water will generally dissipate most common soil from the surface. Using a soft
cloth, wash the area to be cleaned and rinse. If stubborn dirt remains, as a stain embedded in the grain of the vinyl, use a soft
brush, and if necessary, a touch of cleaning powder. In both situations, rinse and dry with a soft cloth.
16