Dream-Flight r2106gf, Flight Manual

Page: 13 / 28

4. Apply 50mm-long x 13mm-wide Velcro strips to battery and inside fuselage battery compartment as shown
below. The Velcro allows the battery to be adjusted fore and aft during final balancing. Use the remaining
Velcro for mounting receiver or a spare battery.
5. For now, mount battery in the most forward position.
6. Twist the servo wires together for a neater installation and then plug both elevon servo plugs into the proper
receiver channel ports (as determined in "Radio Gear Setup").
7. Install receiver as shown. You can use the extra Velcro or a bit of double-sided tape if you like.
8. Replace canopy and check it for proper fit. If necessary, tidy up your wiring so that it does not interfere
with fit of canopy.
6.