15 of 73
Reference Manual ATOM one 4K mini
6 Settings Handling
6.1 Set Functions
To change any settings run the matching command with its required parameters.
Example:
video_mode 5
OK
6.2 Get Functions
Any setting can be checked by running the function
without parameters or followed by a
question mark.
The output of the
get
function represents a valid command followed by
parameters. This string can be parsed by external applications to extract the current
settings out of the system.
Example:
video_mode
video_mode 5
(returned)
video_mode ?
video_mode 5
(returned)
6.3 auto_save <flag>
Controls auto save.
Flag
Function
0
Auto save OFF
1 (reset)
Auto save ON
With this flag any settings change will instantly saved into the current settings bank for
startup.
By turning this off, tests on the camera settings will not change / destroy internal saved
settings.
In case auto save is OFF the save_settings command must be used to store the current
setup.
Example:
auto_save 0
6.4 save_settings
ATOM one 4K has a build in storage for settings. It is automatically loaded on start up.
