4
Starting
Temperature
Condition
Timer Display
Room Temperature
Refrigerated
Frozen
C
Select the button to choose the temperature condition of the vessel.
Manual Time Adjustment: While in the temperature condition mode,
use the UP and DOWN buttons to change the timer setting.
Note: The last used warming time is remembered for your next use.
Press the button to start the cycle. The timer will count down until the
warming is finished.
CAUTION: DO NOT touch warming chamber during or immediately after use.
5. Promptly remove vessel to avoid overheating. Gently stir or swirl liquid to ensure
it warms evenly. DO NOT shake.
6
WARMING TIME CHART
This chart corresponds to the times pre-programmed into the warmer.
Note: Run two cycles for 5-11 oz (150-325 mL) in frozen plastic bottles.
D
Summary of Contents for natural flow MilkSPA AC143
Page 20: ...WSP001...