Vigor2110 Series User’s Guide
77
assigned.
Specify an IP address
Click this radio button to specify some data if you want to use
Static
IP
mode.
IP Address:
Type the IP address.
Subnet Mask:
Type the subnet mask.
Gateway IP Address:
Type the gateway IP address.
Default MAC Address
: Click this radio button to use default MAC
address for the router.
Specify a MAC Address
: Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the
Specify a MAC Address
and enter the MAC
address in the MAC Address field.
DNS Server IP
Address
Type in the primary IP address for the router if you want to use
Static IP
mode. If necessary, type in secondary IP address for
necessity in the future.
4
4
.
.
1
1
.
.
4
4
P
P
P
P
T
T
P
P
To use
PPTP
as the accessing protocol of the internet, please choose
PPTP
from
Internet
Access
menu. The following web page will be shown.
PPTP Setup
Enable
- Click this radio button to
enable a PPTP client to establish
a tunnel to a DSL modem on the WAN interface.
Disable
– Click this radio button to close the connection through
PPTP.
PPTP
Server
- Specify the IP address of the PPTP/L2TP server if
you enable PPTP/L2TP client mode.
ISP Access Setup
Username
-Type in the username provided by ISP in this field.
Password
-Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously in
Application – Schedule
web page and you can use the number that
you have set in that web page.