Vigor2110 Series User’s Guide
56
Voice Active Detector -
This function can detect if the voice
on both sides is active or not. If not, the router will do
something to save the bandwidth for other using. Click On to
invoke this function; click off to close the function.
Default SIP Account
You can set SIP accounts (up to six groups) on SIP Account
page. Use the drop down list to choose one of the profile names
for the accounts as the default one for this phone setting.
Play dial tone only when account registered -
Check this box
to invoke the function.
In addition, you can press the
Advanced
button to configure tone settings, volume gain, MISC
and DTMF mode.
Advanced
setting is provided for fitting the telecommunication custom for
the local area of the router installed. Wrong tone settings might cause inconvenience for users.
To set the sound pattern of the phone set, simply choose a proper region to let the system find
out the preset tone settings and caller ID type automatically. Or you can adjust tone settings
manually if you choose User Defined. TOn1, TOff1, TOn2 and TOff2 mean the cadence of the
tone pattern. TOn1 and TOn2 represent sound-on; TOff1 and TOff2 represent the sound-off.
Region
Select the proper region which you are located. The common
settings of
Caller ID Type
,
Dial tone
,
Ringing tone
,
Busy
tone
and
Congestion tone
will be shown automatically on the
page. If you cannot find out a suitable one, please choose
User
Defined
and fill out the corresponding values for dial tone,
ringing tone, busy tone, congestion tone by yourself for VoIP
phone.