manualshive.com logo in svg

Draytek Vigor 2110, User Manual, Page: 192 / 226

Share
Download
Draytek Vigor 2110 User Manual Download Page 192

 

Vigor2110 Series User’s Guide

 

184

DNS

 

Display the assigned IP address of the primary DNS.

 

WAN------- 

Link Status 

Display current connection status.

 

MAC Address

 

Display the MAC address of the WAN Interface. 

Connection

 

Display the connection type. 

IP Address

 

Display the IP address of the WAN interface. 

Default Gateway

 

Display the assigned IP address of the default gateway. 

VoIP------- 

Port

 

Indicate the VoIP phone port. 

Profile

 

Display the profile name for SIP account. 

In/Out

 

Display the number for incoming/outgoing phone call. 

Wireless LAN------- 

MAC Address

 

Display the MAC address of the wireless LAN. 

Frequency Domain

   

It can be Europe (13 usable channels), USA (11 usable 
channels) etc. The available channels supported by the 
wireless products in different countries are various. 

Firmware Version

   

It indicates information about equipped WLAN miniPCi 
card. This also helps to provide availability of some 
features that are bound with some WLAN miniPCi. 

SSID

 

Display the SSID of the router. 

Summary of Contents for Vigor 2110



































































































































































































































Reviews:

No comments