Vigor2110 Series User’s Guide
136
Enable IGMP Proxy
Check this box to enable this function. The application of
multicast will be executed through WAN port.
Enable IGMP Snooping
Check this box to enable this function. Multicast traffic will be
forwarded to ports that have members of that group. Disabling
IGMP snooping will make multicast traffic treated in the same
manner as broadcast traffic.
Group ID
This
field displays the ID port for the multicast group. The
available range for IGMP starts from 224.0.0.0 to
239.255.255.254.
P1 to P4
It indicates the LAN port used for the multicast group.
Refresh
Click this link to renew the working multicast group status.
If you check Enable IGMP Proxy, all the multicast groups will be listed and all the LAN ports
(P1 to P4) are available for use.
4
4
.
.
9
9
.
.
5
5
W
W
a
a
k
k
e
e
o
o
n
n
L
L
A
A
N
N
A PC client on LAN can be woken up by the router it connects. When a user wants to wake up
a specified PC through the router, he/she must type correct MAC address of the specified PC
on this web page of
Wake on LAN
of this router.
In addition, such PC must have installed a network card supporting WOL function. By the
way, WOL function must be set as “Enable” on the BIOS setting.
Wake by
Two types provide for you to wake up the binded IP. If you
choose Wake by MAC Address, you have to type the correct
MAC address of the host in MAC Address boxes. If you choose
Wake by IP Address, you have to choose the correct IP address.
IP Address
The IP addresses that have been configured in
Firewall>>Bind
IP to MAC
will be shown in this drop down list. Choose the IP
address from the drop down list that you want to wake up.
MAC Address
Type any one of the MAC address of the binded PCs.
Wake Up
Click this button to wake up the selected IP. See the following
figure. The result will be shown on the box.