manualshive.com logo in svg

Draytek Vigor 2110, User Manual, Page: 105 / 226

Share
Download
Draytek Vigor 2110 User Manual Download Page 105

 

Vigor2110 Series User’s Guide 

97

To edit 

Filter Rule

, click the 

Filter Rule

 index button to enter the 

Filter Rule 

setup page. 

 

Check to enable the 
Filter Rule

 

Check this box to enable the filter rule. 

Comments 

Enter filter set comments/description. Maximum length is 14- 
character long. 

Index(1-15)

 

Set PCs on LAN to work at certain time interval only. You may 
choose up to 4 schedules out of the 15 schedules pre-defined in 

Applications >> Schedule

 setup. The default setting of this filed is 

blank and the function will always work. 

Direction 

Set the direction of packet flow (LAN->WAN/WAN->LAN). It is for 

Data Filter 

only. For the 

Call Filter

, this setting is not available 

since 

Call Filter

 is only applied to outgoing traffic. 

Source/Destination IP

 Click 

Edit

 to access into the following dialog to choose the 

source/destination IP or IP ranges.   
 

Summary of Contents for Vigor 2110



































































































































































































































Reviews:

No comments