4
disinfection.
E: Illumination key: Press to start or stop the illumination.
Parameter specifications:
1. In the standard state, long press the SET button, the upper row on screen displays LK,
adjust LK=8, press the SET button to enter setting
2. Temperature parameter setting: In the standard state, long press the SET button, the
upper row on screen displays LK, adjust LK=3, press the SET button to enter the
temperature setting.
Symbol
Item
Value
Description
Factory set
value
KS
Power
on/Start
0
~
2
0: Stop state when power is on 1: Run from
the first stage when power is on; 2: Run from
the place where the power was last cut off
after power on.
0
md
Program
mode
0
~
1
0: Customized control; 1: Multi-segment
programming control.
0
tn
Timing
method
0
~
1
0:Start running timer, 1:when temperature
stable start timing (only fixed value)
1
Hn
Timing Unit
0
~
1
0:minutes
,
1:hour
0
Fn
High
and
low
fan
switch
0
~
100
Start the low-speed fan when the
temperature is between the( set value + Fn)
and (the set value-Fn); start the high-speed
fan when the temperature is outside (the set
value + Fn) to (the set value-Fn)
1
Ly
Lighting
delay
0
~
9999
The lighting lamp is turned on,it will
automatically turn off when the delay time is
not 0. when "Delay time is 0 ",the delay is
invalid, the lighting must be turned off
manually.
0
~
9999M/h
(
0
)
srt
Disinfection
delay
0
~
9999
The disinfection lamp is turned on, when
the delay time is not 0, it will automatically
turn off when the time is up. When delay time
is 0 , the delay is invalid, the lighting must be
turned off manually.
0
~
9999M/h
(
0
)
mon
Scheduled
boot
time
setting/
scheduled
boot month
setting
0
~
9999
Function one; the meter without Beijing time
will automatically turn on after mon minutes;
Function two; the instrument with Beijing
time, when Beijing time reaches the set time
(day, Hr, mTn) here, it will be turned on,
when Mon is greater than 12 ,the same as
function one.
0