Draper STORMFORCE 65142, Instructions Manual

Page: 5 / 20

3. WARRANTY
3.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product Help Line (023) 8049 4344.
A proof of purchase must be provided with the tool.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This warranty period covering parts/labour is 6 months
from the date of purchase except where tools are hired out when the warranty period is 90 days
from the date of purchase. This warranty does not apply to any consumable parts, any type of
battery or normal wear and tear, nor does it cover any damage caused by misuse, careless or
unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other than
the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will
be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms
are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
13. EXPLANATION OF SYMBOLS
13.1 EXPLANATION OF SYMBOLS
Read the instruction manual.
Wear safety glasses.
Wear ear defenders.
Wear protective gloves.
Long and loose hair must be
contained or securely tied back.
Do not abandon into the
environment.
Keep out of the reach of children.
Warning!
Warning!
Risk of crushing.
- 4 - - 17 -
4. INTRODUCTION
4.1 SCOPE
This composite air hammer can be used for a wide range of applications such as general
automotive body shop work and ceramic tile removal. Any other use other than that it was
designed for is considered misuse.
4.2 SPECIFICATION
Stock No. ...............................................................................................................................65142
Part No. ............................................................................................................................... SFAH4
Chisel shank opening ..........................................................................................10.18mm (0.401")
Speed (no load) ............................................................................................................. 4500R/min
Stroke length ..........................................................................................................................43mm
Max. operating air pressure ...................................................................................... 90psi (6.2bar)
Average air consumption.....................................................................................4.0cfm (113L/min)
Minimum air line size...............................................................................................................
3
⁄
8
"ID
Air inlet ................................................................................................................................¼" BSP
Sound pressure level.......................................................................................................... 95dB(A)
Sound power level........................................................................................................... .106dB(A)
Vibration level........................................................................................................................20m/s
2
Weight .....................................................................................................................................1.1kg
Warning!
● Wear safety glasses and ear defenders.
* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to prEN ISO 15744:1999
and declared according to EN ISO 4871.
** A-Weighted Sound Power Level in accordance to prEN ISO 15744:1999 and declared according to EN
ISO 4871.
12. TROUBLESHOOTING
We recommend the
use of Draper Air
Tool Oil: 500ml Stock No.34681
1Litre Stock No.34682
250ml Stock No.34679
12.1 TROUBLESHOOTING GUIDE
Tool will not operate.
Air flows slightly from exhaust.
Tool will not operate.
Air flows slightly from exhaust.
Spindle turns freely.
– Motor or throttle seized with
dirt.
– Rotor vane seized.
– Check for dirt in air inlet.
– Pour air tool lubricating oil into
air inlet.
– Operate trigger in short bursts.
– If chisel fails to move, return to
service centre.
– Pour air tool lubricating oil into
air inlet.
– Operate tool in short bursts.
– If tool remains jammed, return to
service centre.
Hammer seized. – Motor vane broken.
– Gears broken or jammed by
foreign object.
– Return to service centre.
Tool will not shut off. – 'O' rings throttle valve
dislodged from seat inlet valve.
– Replace 'O' ring or return to
service centre.
Problems Possible cause Required action
- 5 - - 16 -