Draper STORMFORCE 65142 Instructions Manual Download

Page: 19 / 20

NOTES

1. TITLE PAGE

1.1 INTRODUCTION:

USER MANUAL FOR: 6 Piece Air Hammer Kit

Stock No: 65142

Part No: SFAH4

As our user manuals are continually updated, users should make sure that they use

the very latest version.

Downloads are available from: http://drapertools.com/manuals

Draper Tools Limited

Hursley Road

Chandler’s Ford

Eastleigh

Hampshire

SO53 1YF

Website: drapertools.com

Product Helpline: +44 (0) 23 8049 4344

General Fax: +44 (0) 23 8026 0784

1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:

WARNING! – Information that draws attention to the risk of injury or death.

CAUTION! – Information that draws attention to the risk of damage to the product or

surroundings.

Permission is granted to reproduce this publication for personal and educational use

only. Commercial copying, redistribution, hiring or lending is prohibited.

No part of this publication may be stored in a retrieval system or transmitted in any

other form or means without written permission from Draper Tools Limited.

In all cases this copyright notice must remain intact.

1.2 REVISIONS:

Date first published July 2019.

- 19 -

Summary of Contents for STORMFORCE 65142





















Search results

Summary of Contents for STORMFORCE 65142

Reviews:

Related manuals for STORMFORCE 65142

Brands by name

Popular brands

Draper STORMFORCE 65142, Instructions Manual

Search results

Summary of Contents for STORMFORCE 65142

Reviews:

Related manuals for STORMFORCE 65142

Brands by name

Popular brands