Draper 83591, Instructions For

Page: 5 / 24

5
4. INTRODUCTION
4.1 SCOPE
This hand held power tool uses abrasive disks to grind metals or masonry. It is intended for
domestic and light commercial use only. Any other application is considered misuse.
4.2 SPECIFICATION
Stock no ................................................................................................................................... 83594
Part no .............................................................................................................................. PT2023SF
Motor:
Rated voltage ................................................................................................................... 230V~
Rated frequency .................................................................................................................. 50Hz
Rated input ..................................................................................................................... 2000W
Revolutions per minute (no load) ............................................................................. 6,500min
-1
Disc Diameter ...................................................................................................................... 230mm
Spindle thread .......................................................................................................................... M14
Bore...................................................................................................................................... 22.2mm
Vibration level ...................................................................................................................... 1.5m/s
2
Sound pressure level ...................................................................................................... 99.17dB(A)
Sound power level ...................................................................................................... 110.17dB(A)
Weight (nett)...............................................................................................................................5kg
Vibration level: Main handle: .......................................................................................... 13.14m/s
2
4.3 HANDLING & STORAGE
The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the machine is unprotected from dust and debris;
components will become clogged: And if not cleaned and maintained correctly or regularly
the machine will not perform at its best.