Draper 83591, Instructions For

Page: 16 / 24

16
9. SETTING THE GRINDER
FIG. 9
FIG. 10
9.3 GRINDING – FIG. 9
When performing grinding operations maintain
an angle of approximately 30° between the
work surface and the disc face.
Only use abrasives specifically designed for
this task.
9.4 CUTTING – FIG. 10
Cutting operations should only be attempted
with the “cutting” guard fitted to this grinder.
Please contact Draper Tools for further
information on how to purchase this optional
accessory.
This guard must be fitted for your safety.
When performing cutting-off operations do not
incline the machine as this can lead to the
abrasive wheel becoming jammed, damaged or
excessively and abnormally worn.
Only use abrasives specifically designed for
this task.
WARNING: As the cutting-off/grinding wheel
wears during use, its diameter reduces. This
reduces the peripheral speed and the cutting
efficiency. This results in increased load on the
grinding machine which if continued will
damage the motor. Ensure that the diameter of
the wheel is within 25% of its original size.
IMPORTANT: Excessive pressure on the machine
does not result in a higher abrasive efficiency.
Excessive pressure increases wear and tear on
the accessory and will damage the grinder which
is not covered under the guarantee.
IMPORTANT
LEGAL
NOTICE
IMPORTANT
LEGAL
NOTICE
30°