Draper 83591, Instructions For

Page: 13 / 24

13
8. PREPARING THE GRINDER
FIG. 2
FIG. 1
FIG. 3
8.1 FITTING AUXILIARY HANDLES – FIG. 1
NOTE: Remove the plug from the socket before
carrying out adjustment, servicing or maintenance.
For reasons of safety, when working with this type of
electric power tool, the operator must always use the
auxiliary handle
.
Screw the handle clockwise, into one of the three
threaded apertures best suited to the application and
user comfort.
WARNING:
This machine must never be operated without the
appropriate guard in place correctly fitted and
operating fully.
8.2 FITTING THE GUARD – FIGS. 2 – 3
Position the guard onto the grinder collar (fig.2.)
Rotate the guard until it is in the correct position and
then tighten the fixing clip
using the hex key
to secure the guard in place.
WARNING: Never attempt to operate this machine
without the guard securely fitted and correctly
positioned*.
* With the exception of wire cup brushes etc. which
negate the guards effectiveness.