– 10 –
14
FIG.
(23)
The crevice nozzle attachment
(24)
should be used
when the water level is too high to use the large fluid
nozzle.
Note: To ensure the air flow is adequate we recommend
that the end of the nozzle is not totally immersed.
9. INJECTION/EXTRACTION
SHAMPOO
9.1 ATTACH THE SHAMPOO DELIVERY
HOSE– FIGS. 15– 16
− Fix the shampoo delivery hose
(20)
to the vacuum
hose
(17)
using the clips
(29)
supplied.
− Fix the large plug end of the shampoo delivery hose
(20.1)
into the shampoo delivery socket
(2)
located
on the front of the motor housing.
− Fix the other end of the shampoo delivery hose with
the screw fitting
(20.2)
onto the shampoo/vacuum
control handle grip.
15
FIG.
(17)
(29)
(20)
16
FIG.
(20.1)
(2)
(20.2)
9.2 FILL THE SHAMPOO TANK
– FIG. 17
− Fill the shampoo tank
(11)
with as much correctly
diluted anti-foam shampoo (Draper Stock No.28801)
as required. Always follow the shampoo
manufacturer’s direction ratios. The shampoo tank
has a capacity of approximately 4 litres.
17
FIG.
(11)
− Fit the shampoo supply tank into its housing on the
base of the machine, situated to the rear.
9.3 CONNECTING SHAMPOO INLET
HOSE AND FILTER – FIGS. 18 – 19
− Place the sponge filter end of the shampoo inlet hose
(10)
into the shampoo tank
(11)
and push fit the cap
(10.1)
onto the shampoo tank to close.
− Connect the plastic plug on the other end of the
shampoo inlet hose directly into the shampoo
delivery inlet socket
(10.2)
on the side of the motor
housing.
