– 6 –
6. INITIAL MACHINE
ASSEMBLY
6.1 FITTING THE PUSH HANDLE
– FIGS. 1 - 2
Note: The procedure for attaching the push handle to
the machine must be performed before the fitting of the
2 rear wheels.
− Assemble the main hand grip part of the push handle
(13.1)
with the two uprights as
(13.2)
shown.
1
FIG.
(13.3)
(13.4)
(14)
(14)
(13.1)
(13.2)
− Making sure it is the correct way around (see Fig. A),
slide the completed handle assembly through the
holes in the tool storage section at the rear of the
tank
(9)
and then further down into the slots located
in the base of the vacuum cleaner
(1.1)
, pressing
down firmly until it snap-fits into place.
(10)
Shampoo inlet hose and filter.
(11)
Shampoo tank.
(13)
Push handle.
(14)
Handle fixing knob.
(15)
Castors × 2.
(16)
Rear wheels × 2.
(17)
Flexible vacuum hose.
(18)
Shampoo/vacuum control
handle grip.
(19)
Retractable extension tube.
(20)
Shampoo delivery hose (main).
(21)
Vacuum attachment for floors
and carpets.
(22)
Small fluid nozzle for sofa and
upholstery.
(22.1)
Shampoo delivery hose (small
fluid nozzle).
(23)
Large fluid nozzle.
(23.1)
Shampoo delivery hose (large
fluid nozzle).
(24)
Crevice nozzle.
(25)
Brush attachment for delicate
surfaces.
(26)
Paper dust bag.
(27)
Cartridge filter.
(28)
Anti-foam filter.
(29)
Hose clips.
(30)
Wheel locking pins × 2.
(31)
Wheel hub caps × 2.
(32)
Wheel washers × 4.
(33)
Wheel axle.
(23.1)
(18)
(17)
(29)
(20)
(19)
(25)
(13)
(27)
(28)
(26)
(31)
(30)
(32)
(15)
(23)
(22.1)
(10)
(24)
(22)
(11)
(21)
(33)
(16)
(16)
FIG.B
