– 8 –
ensure a longer service life and higher suction power. If
the cartridge filter is not used when vacuuming dry dust
and dirt the motor wil be damaged.
7.2 ATTACHING THE PAPER DUST
BAG – FIG. 7
When using the paper dust bag
(26)
, dirt can be
removed more hygienically and the life of the cartridge
filter will be prolonged.
The paper dust bag NEVER replaces the cartridge filter
but, the filter cartridge can be used without the paper
dust bag.
Note: As suction power decreases, replace the paper
dust bag with a new one.
Place housing on top and secure using the two tank
catches
(6)
.
7
FIG.
(26)
(6)
7.3 CONNECTING ATTACHMENTS –
FIGS. 8 - 9
Insert the the head of flexible vacuum hose
(17)
into the
shampoo/vacuum control handle grip
(18)
, and twist to
lock in place.
The grip provides a suction power regulating device
(18.1)
. To obtain full suction power the regulator should
be closed.
The grip also incorporates a remote on/off control
(18.2)
to operate the machine for shampoo/vacuuming
operations.
8
FIG.
(17)
(18)
(18.1)
(18.2)
The vacuum attachment for floors and carpets
(21)
can
be used on hard floors - parquet, cork, vinyl, ceramic,
etc. Any of the other attachments may be used
depending upon the specific application. They are
attached with a tight push fit.
9
FIG.
(21)
(19)
7.4 SWITCHING ON – FIGS. 10 – 11
Connect the vacuum cleaner to the power supply and
switch the vacuum cleaner ‘on’ by pushing the power on/
off switch
(5)
.
10
FIG.
(5)
− Use the machine in vacuum only mode by pressing
the button identified by the symbol below situated on
the front panel of the machine
(4.1)
.
Note: After selecting ‘on’ from the main switch, vacuum
cleaning mode can be also selected from the button
(18.1)
located on the remote control handle grip.
Vacuum cleaning selection.
