Draper 32284 Instructions Manual Download Page 17

Page: 17 / 20

10. MAINTENANCE

10.7 BURNER HEAD - FIGS. 11 - 12

Open upper shell (See left instructions).

Remove fan blade (See Fan Blades).

Remove fuel and air line hoses from burner head.

Remove ignitor wire from spark plug.

Remove spark plug from nozzle rod using a No.2
cross-slot screwdriver.

Turn the nozzle rod anti-clockwise and separate from
the burner head.

Carefully remove the nozzle from the nozzle rod
using a 5/8” socket.

Blow compressed air through the face of the nozzle,
removing any dirt.

Reinstall nozzle into nozzle rod and tighten firmly.

Reinstall spark plug onto nozzle rod.

Turn the nozzle rod clockwise to reassemble into the
burner head.

Attach ignitor wire to spark plug.

Attach fuel and air line hoses to burner head.

Reinstall fan blade and upper shell.

10.8 SPARK PLUG - FIG. 13

CLEAN AND RE-GAP EVERY 600 HOURS OF OPERATION
OR REPLACE AS NEEDED.
-

Remove upper shell (See Air Intake Filter).

Remove fan (See Fan Blades).

Remove ignitor wire from spark plug.

Remove spark plug from burner head using No.2 cross
slot screwdriver.

Clean and re-gap spark plug electrodes to 3.5mm gap.

Reinstall spark plug into burner head.

Attach ignitor wire to spark plug.

Reinstall fan and upper shell.

FIG.11

FIG.12

FIG.13

Ignitor Wire

Spark Plug

Nozzle Rod

Nozzle Face

Nozzle

Air Line Hose

Burner Head

Fuel Line Hose

Air Hose Fitting

Fuel Hose Fitting

Summary of Contents for 32284





















Search results

Summary of Contents for 32284

Reviews:

Related manuals for 32284

Brands by name

Popular brands

Draper 32284, Instructions Manual

Search results

Summary of Contents for 32284

Reviews:

Related manuals for 32284

Brands by name

Popular brands