– 16 –
11. TIPS BEFORE INSTALLATION
Warning!
ONLY use the heater on a solid flat surface that is noncombustible (concrete etc). You MUST NOT
use the heater in a non-level surface, as this will affect the combustion efficiency and operation.
You MUST have suitable space around the heater during its operation – minimum of 1.5 metres on
either side, the front and the top and at least 10cm from the back wall.
If you are using the heater indoors, we would strongly recommend the Draper 07399 flue kit to
ensure the exhaust fumes are routed out of the building safely.
Below is an example of a flue kit attached to the heater – but any flue use MUST be installed and
tested by a suitably qualified professional to ensure safe operation of the heater.
