– 5 –
4. INTRODUCTION
4.1 SCOPE
This heater is designed to heat large, semi-open areas by means of combustion of Diesel or
Kerosene fuel, and is electrically operated. Any other application is considered mis-use.
4.2 SPECIFICATION
STOCK NOS. ................................................................................................ 06732 / 06733 / 07108
PART NOS. .....................................................................DSH-FIR400 / DSH-FIR515 / DSH-FIR675
MOTOR:
RATED VOLTAGE ............................................................................................................... 230V
RATED FREQUENCY .........................................................................................................50HZ
RATED INPUT (IGNITION) .............................................................................. 60W / 70W / 70W
RATED INPUT (RUNNING) ............................................................................. 40W / 50W / 50W
HEAT OUTPUT..............................40,000BTU/11.6KW / 51,500BTU/15.1KW / 67,500BTU/19.8KW
FUEL .................................................................................................................DIESEL/KEROSENE
DIESEL CONSUMPTION ................................................. 0.9LTRS/HR / 1.2LTRS/HR / 1.7LTRS/HR
TANK CAPACITY ..........................................................................................25LTR / 30LTR / 45LTR
WEIGHT (NETT) ...............................................................................................40KG / 47KG / 58KG
DIMENSIONS ...............................710X320X1,110MM / 920X320X1,110MM / 1235X320X1,110MM
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product.
• Dropping or letting this heater fall-over could also result in personal injury. This product is
not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
• Exposure to damp air can gradually corrode components.
• If the product is unprotected from dust and debris, components will become clogged.
• If not cleaned and maintained correctly or regularly, the machine will not perform at its best.