7
HDE24A Item # 1002515A
High-Definition Video Encoder
SDE24A Item # 1002514A
Standard-Definition Dual Video Encoder
ASI II Item # 1002397
ASI Input Module w/ loop thru
SDM1000 Item # 1002576
Satellite Tuner and Demodulator Module - QPSK/8PSK
Module Specifications
Specifications, price, and availability are subject to change without notice or obligation.
ASI INPUT CLOCK:
270 MHz
ASI INPUT DATA RATE:
Maximum of 80 Mbps
ASI OUTPUT RATE:
Identical to the ASI Input Stream
VIDEO INPUTS
HDMI™:
1x HDMI Input - to protect copyrighted
content, this encoder does not support
HDMI copy protection (HDCP)
Component Video:
1x HD Component (YCrCb) Video Input
Composite Video:
1x 1V p-p +/- 3 dB, 480i only
Closed Captioning Input:
1x 1V p-p +/- 3 dB, 480i Composite Video
(used for Closed Captioning data
extraction during HD encoding)
AUDIO INPUTS
RCA-TYPE L+R:
1x 1Vrms nominal, 3.5Vrms maximum
HDMI-EMBEDDED AUDIO:
Supports PCM (uncompressed)
digital audio from HDMI
VIDEO OPTIONS
INPUT VIDEO MODES:
480i (720x480 @ 30 fps)
(
SUPPORTED)
480p (720x480 @ 60 fps)
720p @ 60Hz (1280x720 @ 60 fps)
1080i @ 30Hz (1920x1080 @ 30 fps)
Supports auto-scan for input resolution
ENCODER FORMAT:
MPEG-2 or MPEG-4 / H.264, selectable
Supports auto scan
VIDEO ADUSTMENTS:
Brightness, contrast, hue, and saturation
MPEG-4 PROFILE SUPPORT:
Simple, Advanced Simple, High
BITRATE:
Up to 19Mbps (depends on input format)
AUDIO OPTIONS
ENCODER FORMAT:
Dolby Digital® AC-3 or MPEG1, Layer 2
OUTPUT BITRATE:
128, 192, 320, 384kbps
ANALOG INTERFACE
Composite Video Inputs:
2 composite inputs, one for each
program/source
Component Video Input Level:
1 Volt p-p ± 3 dB
Audio Inputs, for 2 Programs::
RCA type for L + R audio channels, 2 sets
Audio Input Level:
1 Vrms audio gain:15 to 0 dB
(user-adjustable)
MPEG ENCODER
ENCODE FORMAT - #1 INPUT:
MPEG-2 or MPEG-4 / H.264, selectable
ENCODE FORMAT - #2 INPUT:
MPEG-2 or MPEG-4 / H.264, selectable
Note: Each Encoder module has two sets of inputs marked 1 and 2. Number 1 input from
all installed modules will appear as odd-numbered encoders in the MEQ1000B menu.
Likewise, number 2 SDE24A inputs will correspond to even-numbered encoders in the
MEQ1000B menu.
INPUT ENCODING BITRATE:
Constant Bitrate: 1 Mbps to 8 Mbps
ENCODING RESOLUTION
:
720 X 480 (Standard Definition)
VIDEO ADJUSTMENTS:
Brightness, contrast, hue, and saturation
AUDIO ENCODER
SELECTABLE TYPES:
Dolby Digital® AC-3 or MPEG1, Layer 2
DOLBY DIGITAL® ENCODER:
Manufactured under license from
Dolby Laboratories
OUTPUT BITRATE:
128, 192, 320, 384kbps
FREQUENCY RANGE:
950 MHz to 2150 MHz
INPUT IMPEDANCE:
75 Ohm, return loss = 10 dB
INPUT LEVEL RANGE:
-25 dBm to -65 dBm / transponder
MODE:
QPSK, 8PSK
FEC:
DVB-S2, DCII, advanced Turbo modes
SYMBOL RATE:
2 MS/s to 45 MS/s
NOTE: Firmware updates may be required for MEQ1000. MEQ1000s must be
updated to V3.1 or later.
Summary of Contents for MEQ1000B
Page 11: ...11 This page is intentionally left blank ...
Page 18: ...18 Modules Tab SDE24A Encoder Module 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ...
Page 20: ...20 Modules Tab HDE24A Encoder Module 1 2 3 4 5 6 7 8 9 10 11 12 13 17 14 15 16 ...
Page 23: ...23 This page is intentionally left blank ...
