12
Login Screen
To begin setup, connect the appropriate input and output video cables and plug in the MEQ1000B power cable.
ETHERNET ACCESS:
Local or remote communication with the unit is only possible through a GUI-based menu via any standard web browser
Chrome or Firefox is recommended, for IE use IE11 minimum. Before you can communicate with the unit you must
configure your computer's IP address to be on the same subnet as the MEQ1000B's default IP address. To do so, follow
these steps:
Connect an Ethernet cable from your computer to the Control GigE port on the front panel of the MEQ1000B.
1.
The following steps explain how to do this for a computer with
Windows XP
operating software:
a) On your computer, open the "Control Panel"
b) Double-click on "Network Connections"
c) Right-click on the "Local Area Connection", and then click on the "properties".
d)
A dialog box entitled "Local Area Connection Properties" will appear. In this box, double-click on the "Internet
Protocol (TCP/IP)".
e)
A dialog box entitled "Internet Protocol (TCP/IP) Properties" will appear. Select the "Use the following IP address"
option and enter the following addresses:
IP address:
172.16.80.2
Subnet mask:
255.255.255.0
No need to enter a value for the
Default Gateway
for local access.
Click OK to close the dialog box. Now your computer is ready to communicate with the unit.
2.
The following steps explain how to do this for a computer with
Windows 7
operating software:
a) On your computer, open the "Control Panel"
b) Click on “Network and Internet”
c) Click on the "View network status and tasks"
d)
Click on “Change Adapter Settings” on left hand side of the window
e)
Right-click on the "Local Area Connection", and then click on the "Properties".
f)
A dialog box entitled "Local Area Connection Properties" will appear. In this box, double-click on the "Internet
Protocol Version 4 (TCP/IPv4)".
g)
A dialog box entitled "Internet Protocol Version 4 (TCP/IPv4) Properties" will appear. Select the "Use the following
IP address" option and enter the following addresses:
IP address:
172.16.80.2
Subnet mask:
255.255.255.0
No need to enter a value for the
Default Gateway
for local access.
Click OK.
Open a web browser on your computer and enter the following URL address (http://172.16.80.1). Once the MEQ1000B
web server has been loaded from your browser, you should see the login dialog. Enter the username and password and
click LOG IN. The default username is "
admin
" (in lower case letters) and the default password is "
pass
" (in lower case
letters).
Summary of Contents for MEQ1000B
Page 11: ...11 This page is intentionally left blank ...
Page 18: ...18 Modules Tab SDE24A Encoder Module 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ...
Page 20: ...20 Modules Tab HDE24A Encoder Module 1 2 3 4 5 6 7 8 9 10 11 12 13 17 14 15 16 ...
Page 23: ...23 This page is intentionally left blank ...
