14
Modules Tab
Select Module:
Indicates Input module installed in Slot 1 or Slot 2.
Module Information:
Indicates Module Type and Firmware Version of input module.
Module IP Address:
User selectable from 000.000.000.000 thru 255.255.255.255 with the exception of
224.000.000.000 thru 239.255.255.255 is not valid.
IGMP Version:
v2 or v3, or auto detects with the appropriate version. V3 will allow up to two specific
sources, or allows ALL sources if no specific sources are specified.
Receive Protocol:
UDP or RTP, or auto detects the appropriate protocol.
Receive IP Address:
User selectable from 000.000.000.000 thru 255.255.255.255
Receive Port:
User selectable from 0 to 65535
Source IP Address 1:
Same range restriction as the Module IP Address. Only used when IGMP
VERSION is set to V3 or AUTO. Not used when IGMP VERSION is set to V2.
Source IP Address 2:
Same range restriction as the Module IP Address. Only used when IGMP
VERSION is set to V3 or AUTO. Not used when IGMP VERSION is set to V2.
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
8
9
7
IPI10000 IP Input Module
Summary of Contents for MEQ1000B
Page 11: ...11 This page is intentionally left blank ...
Page 18: ...18 Modules Tab SDE24A Encoder Module 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ...
Page 20: ...20 Modules Tab HDE24A Encoder Module 1 2 3 4 5 6 7 8 9 10 11 12 13 17 14 15 16 ...
Page 23: ...23 This page is intentionally left blank ...
