Dragonfire Racing
1) Remove your stock seats and restraints. (be sure to keep all hardware it may be re-used.
2) Start by mounting lap belt to the stock location on both sides of seat. Be sure to mount secure
and correctly to ensure proper function. (see photos below)
3) Next wrap shoulder harness straps to horizontal bar
behind seats (note: this bar should be equal or slightly
below shoulder level while in seat). First adjust
buckle to
desired length of padding away from horizontal bar. Place
between seat and mounting bar. (see photos to right)
4) Wrap strap behind and over horizontal bar. Feed slack through the top of buckle from backside
and pull tight. (see photos below)
