Supplement to the instructions for use
|
Isolette 8000 plus
9
Reprocessing
Removing the drain plug with O-ring (if installed)
1. Remove the drain plug with O-ring (A) at the bottom of the heater well on
devices without the condensation management system.
Removing the condensation management system (if installed)
CAUTION
Risk of injury or damage to the device
Reuse of single-use components can cause patient injury or damage the device.
►
Do not reprocess and reuse single-use components.
CAUTION
Risk of injury or damage to the device
Fluid spills or leaks could cause a slip hazard.
►
If any fluids spill or leak around the device, wipe the area dry.
CAUTION
Risk of injury or damage to the device
Liquid in the collection bottle can contain patient fluids.
►
Collection bottles and fluids should be handled according to hospital guidelines.
When using high levels of humidity, Dräger recommends using the optional
condensation management system.
1. Ensure bed, scale, heater radiator and impeller are removed.
2. Disconnect the condensation management hose (A) from the collection bottle
located underneath the left side of the incubator.
3. Remove the clamp (B) from the condensation management hose and discard.
49643
48109
A
A
B