Supplement to the instructions for use
|
Isolette 8000 plus
23
Reprocessing
1. Slowly raise the hood (A).
2. Install the upper cover (B).
3. Install the T-bars (C) on the upper cover.
4. Install the bed (D) and X-ray tray (inside the bed).
5. If the incubator is equipped with a weighing scale, perform steps 6 through 9.
6. Install the scale (E).
7. Place the mattress on the bed.
8. Reinstall the clamps that hold the scale cable to the incubator.
9. Reconnect the scale cable to the sensor module.
Fitting the iris port sleeves, hose grommets, and hand port gaskets (if
installed)
1. If equipped with the optional iris ports on the side access panels, install the new
iris port sleeves:
48253
A
E
D
C
C
B