manualshive.com logo in svg

Dräger Babyleo TN500, Instructions For Use Manual, Page: 24 / 222

Share
Download
Dräger Babyleo TN500 Instructions For Use Manual Download Page 24

24 

Instructions for use Babyleo TN500 SW 1.0n

Product description

3 Product 

description

3.1 

Structure and function

This chapter contains descriptions of the device components in table format.

Some components and functions are options. The actual device may differ in 
appearance and functions from the descriptions below. For further information, 
see the following chapter: ''Range of functions'' (page 41).

3.1.1 Overview 

of operating modes

The device can be operated as an incubator and as a radiant warmer. Opening or 
closing the hood changes the operating mode.

Fig. 4

Incubator operation (hood closed) and radiant warmer operation (hood 
open)

The user's operating location can be on the right side, on the left side, or at the 
front of the device.

30273

Summary of Contents for Babyleo TN500































































































































































































































Reviews:

No comments