Dräger Babyleo TN500, Instructions For Use Manual, Page: 146 / 222

146 Instructions for use Babyleo TN500 SW 1.0n
Configuration
8.4.1.5 Horizontal tab Therapy
Oxygen (option) Tolerated deviation
for oxygen con-
centr. ± Specify the upper and lower
alarm limit for the tolerated
deviation of oxygen concentra-
tion in the patient compart-
ment. 5 %
Noise/light (option) Noise level Specify the threshold for the
medium and high noise level in
the patient compartment:
– Noise level in dB(A)
Threshold for
medium exposure Threshold for medium
noise level: 50
dB(A)
Threshold for high
exposure Threshold for high noise
level: 80
dB(A)
Light level Specify the threshold for the
medium and high light level in
the patient compartment:
– Light level in lux or fc
Threshold for
medium exposure Threshold for medium
light level: 500
lux , 46
fc
Threshold for high
exposure Threshold for high light
level: 800
lux , 74 fc
Vertical tab Heading or parame-
ter Description Factory setting
Thermoregulation Enter and confirm the configu-
ration password. Define the fol-
lowing therapy values:
Skin temp. Skin temperature 36.5 °C (97.7 °F)
Air temp. Air temperature 30 °C (86 °F)
Humidity Humidity Off
Mattress temp.
(option)
Mattress core temperature Off
Transition Standard
– In incubator operation the
radiant warmer operates
continuously at low power.
– In radiant warmer opera-
tion the convection heater
operates continuously at
low power.
Eco
– In incubator operation the
radiant warmer is switched
off.
– In radiant warmer opera-
tion the convection heater is
switched off.
Standard
ClearView Switch on so that the radiant
warmer operates at low power
and reduces the level of fog-
ging on the hood. On
Vertical tab Heading or parame-
ter Description Factory setting