DR 13 HP Pro, Safety & Operating Instructions Manual

Page: 8 / 36

8 TOW BEHIND
DR
®
FIELD and BRUSH MOWER
Specifications
13 HP Pro Model 17 HP Commercial Model
Machine Warranty 2 year Residential, 90 day Commercial 2 year Residential, 90 day Commercial
Engine Warranty 2 year Residential, 1 year Commercial 2 year Residential, 2 year Commercial
Engine 13 HP Briggs & Stratton Engine, Electric Start,
OHV, 1 Cast-Iron Sleeve, Full Pressure Oil Pump
w/ Oil Filter, 48 oz Oil Capacity, Dual-Element Air
Filter, Fuel Pump, Electronic Ignition 17 HP Kawasaki KAI Engine, Electric Start, V-Twin OHV,
2 Cast-Iron Sleeves, Full Pressure Oil Pump w/ Oil
Filter, 58 oz Oil Capacity, Dual-Element Air Filter, Fuel
Pump, Electronic Ignition
Fuel Tank 2.5 Gallons, Gasoline, Unleaded 2.5 Gallons, Gasoline, Unleaded
Wheels 18" Dia. x 6-7/8" Wide, All Terrain Tread, 28 PSI,
Sealed, Tubeless 18" Dia. x 6-7/8" Wide, All Terrain Tread, 28 PSI, Sealed,
Tubeless
Remote Control Panel Key Switch, Throttle Lever, and Blade Engage
Switch, 5' from Versa-Hitch™ to front of Control
Panel. Key Switch, Throttle Lever, and Blade Engage Switch, 5'
from Versa-Hitch™ to front of Control Panel.
Deck Offset 0%, 50%, 75%, 100%
Out-Rigger™ Tow Bar 0%, 50%, 75%, 100%
Out-Rigger™ Tow Bar
Adjustable Cutting Height 5", 6-1/4", and 7-1/2"
Step & Mow™ Wheel Axle and Versa-Hitch™ 5", 6-1/4", and 7-1/2"
Step & Mow™ Wheel Axle and Versa-Hitch™
Cutting Width 44" 44"
Cutting Capacity 4' High Grass, 1-1/2" Thick Saplings 6' High Grass, 1-1/2" Thick Saplings
Blade Tip Speed 195 MPH or 17,180 Ft/Min 195 MPH or 17,180 Ft/Min
Swinging Blades “PRO-TEK” Swinging Blades
2 Blades, .25" Thick x 16-1/2" Long Hardened Steel “PRO-TEK” Swinging Blades
2 Blades, .25" Thick x 16-1/2" Long Hardened Steel
Deck 11 GA (.12" thick) Welded Steel 11 GA (.12" thick) Welded Steel
Spindle 1-3/8" Dia. Shaft with 2 Sealed 30 mm Bearings 1-3/8" Dia. Shaft with 2 Sealed 30 mm Bearings
Spindle Housing 7 GA (.18" thick) Welded Steel 7 GA (.18" thick) Welded Steel
Push Bar 1-1/4" Dia. x 11 GA (.12" thick) Steel Tubing 1-1/4" Dia. x 11 GA (.12" thick) Steel Tubing
Front Guard 3/16" Thick Compressed Rubber 3/16" Thick Compressed Rubber
Belt 5/8" x 53.8" Type BP51 5/8" x 53.8" Type BP51
Electric Clutch 75 ft-lb Ogura 75 ft-lb Ogura
Fuses 20 AMP Type AGC Fuse (Engine Alternator Circuit)
7 AMP Type AGC Fuse (Clutch Circuit) 20 AMP Type AGC Fuse (Engine Alternator Circuit)
7 AMP Type AGC Fuse (Clutch Circuit)
Machine Overall Width 64-1/4" Outside the Wheels 64-1/4" Outside the Wheels
Machine Overall Length 110" with the Tow Bar fully extended 110" with the Tow Bar fully extended
Machine Overall Height 28-1/4" 28-7/8"
Machine Weight at Tow Bar 35 lbs. 27 lbs.
Machine Weight 442 lbs. 465 lbs.
Shipping Weight 617 lbs. 641 lbs.
Shipping Crate 73" x 60" x 36" 73" x 60" x 36"
Unpacking and Assembling the Machine
Unpacking and assembling the TOW-BEHIND DR
F
IELD and BRUSH MOWER is a two-person job as the 13 HP unit weighs 442
pounds and the 17 HP unit weighs 465 pounds. We recommend you have an extra set of hands available before you begin.
Electric Start models have the Key located on the rear of the Battery Strap as shown in Figure 1 on page 7.
Parts Supplied in Crate:
•
TOW-BEHIND DR FIELD and BRUSH MOWER
•
Safety & Operating Instructions Manual
•
Briggs & Stratton or Kawasaki Engine Manual
•
Small Parts Bag:
- Hook and Loop Straps - Plastic hose (oil drain) - Extra Zip-Tie Wraps