CONTACT US AT
www.DRpower.com
9
Specifications
Model Premier Pro
Pro-XL
Engine
See Engine Owners Manual
See Engine Owners Manual
See Engine Owners Manual
CFM
1200
2000
2000
MPH
200 200 200
Horizontal Rotation
90° left to 90° right
90° left to 90° right
90° left to 90° right
Vertical Rotation
35 50 50
Nozzle Control
Manual Remote Remote
Drive
Push
Push
Self Propelled, Variable Speed
Wheel Size
16" x 2", 10" x 2.75"
12" x 4.5", 10" x 3.5"
12" x 4.5", 10" x 3.5"
Frame
11 GA Steel
12 GA Steel
12 GA Steel
Machine Weight
105 165 175
Machine Dimensions
40"H x 51"L x 25"W
43"H x 57"L x 27"W
43"H x 57"L x 27"W
Assembling the DR WALK BEHIND BLOWER
PREMIER Assembly
The Premier Model is shipped fully assembled with the Handlebar in a folded
position. You will need to adjust the Handlebar to the operating position before
use.
1.
Ensure that the two Handlebar Knobs are loosened (
Figure 3
).
2.
Unfold the Handlebar to the operating position and tighten the Knobs to
secure it.
3.
Refer to the “Adding Engine Oil and Gasoline” section on the next page to
continue setting up the machine.
PRO Assembly
The Pro Model is shipped with the Handlebar disconnected from the machine.
You will need to install the Handlebar to the machine before use.
Parts Supplied in Product Package - PRO MODELS (
Figure 4 and list below
):
Item # Part #
Description
Qty
1 ........... 333321 ..... Nut, Nylon Lock, Flanged, 5/16-18 ......................... 4
2 ........... 385991 ..... Bolt, Hex, Flange, 5/16-18 X 1-3/4", GR5, ZP ........ 4
Tools Needed:
Two 1/2" Wrenches
1.
Pull the Upper Handlebar Assembly from its shipped location and position
the Upper Handlebar Assembly onto the Lower Handlebar (
Figure 5
).
2.
Secure the Handlebar with the Bolts and Locknuts from the product package
using two 1/2" Wrenches.
3.
Refer to the “Adding Engine Oil and Gasoline” section on the next page to
continue setting up the machine.
Bolts and
Locknuts
Figure 5
Upper Handlebar
Assembly
Lower
Handlebar
Handlebar
Figure 3
Handlebar
Knobs
Figure 4
1
2
