CONTACT US AT
www.DRpower.com
11
Chapter 3: Operating the DR WALK BEHIND BLOWER
It may be helpful to better familiarize yourself with the features of your DR WALK BEHIND BLOWER by reviewing
Figure 2a and 2b
in Chapter 2 before beginning the steps outlined in this chapter. Always refer to the Engine manual for more specific Engine
information.
Starting the Engine (Premier Model)
1.
Make sure the Fuel Shutoff Lever is in the “ON” position (
Figure 8
).
2.
Move the Choke Lever to the left to the choke position (leave in the run
position to the right if the engine is already warm).
3.
Adjust the Throttle Lever to the halfway position (
Figure 9
).
4.
Turn the On/Off Switch to the “ON” position (
Figure 10
).
5.
Slowly pull the Starter Cord until you feel resistance, then pull quickly. The
Cord will recoil back into position.
6.
As the engine warms up, slowly adjust the Choke to the right towards the
“RUN” position(
Figure 8
). Wait until the engine runs smoothly before each
Choke adjustment.
Starting the Engine (Pro Model)
Manual Start
1.
Make sure the Fuel Shutoff Lever is in the “ON” position (
Figure 8
).
2.
Move the Choke Lever to the left to the choke position (leave in the run
position to the right if the engine is already warm).
3.
Adjust the Throttle Lever to the halfway position (
Figure 11
).
4.
Turn the Key Switch to the “ON” position (
Figure 12
).
5.
Slowly pull the Starter Cord until you feel resistance, then pull quickly. The
Cord will recoil back into position.
6.
As the engine warms up, slowly adjust the Choke to the right towards the
“RUN” position(
Figure 8
). Wait until the engine runs smoothly before each
Choke adjustment.
Starting the Engine (Pro Model)
Electric Start
1.
Make sure the Fuel Shutoff Lever is in the “ON” position (
Figure 8
).
2.
Adjust the Throttle Lever to the halfway position (
Figure 11
).
Throttle
Lever
Figure 11
Start
On/Off
Switch
Figure 10
Starter
Cord
Throttle
Lever
Figure 9
Choke
Lever
Figure 8
Fuel
Shutoff
Lever
