DPS NetGuardian 16, User Manual

Page: 35 / 64

31
Edit Menu Field Descriptions
11
System 11.1
From the Edit > System menu, you will configure and edit the global system, T/Mon and control settings for the
NetGuardian 16.
Fig. 11.1 - The Edit > System menu
Global System Settings
Name A name for this NetGuardian 16. (Optional field)
Location The location of this NetGuardian 16. (Optional field)
Contact
Contact telephone number for the person responsible for this NetGuardian 16.
(Optional field)
"From" Email Address
A valid email address used by the NetGuardian 16 for sending email alarm
notifications.
SNMP GET String Community name for SNMP requests. (case-sensitive).
SNMP SET String Community name for SNMP SET requests. (case-sensitive).
User Used to change the username for logging into the unit.
Password Used to change the password for logging into the unit (case-sensitive).
DCP Responder Settings (For use with T/Mon)
DCP Unit ID User-definable ID number for this NetGuardian 16 (DCP Address).
Listen DCP Choose to listen DCP over LAN or serial. May also be disabled.
DCP LAN Enter the DCP port for this NetGuardian 16 (UDP/TCP port).
DCP Serial Clickable link to configure serial port settings.
System Controls
Initialize Configuration
Used to restore all factory default settings to the NetGuardian 16. Do not initialize the
non-volatile RAM (NVRAM) unless you want to re-enter all of your configuration
settings again.
Backup Configuration Save the NetGuardian 16's configuration as a .BIN file to your local PC.
Restore Configuration
Click the Upload link and select a .BIN configuration file that you saved previously to
your local PC. This will restore the saved configuration.