13
Fuses
3.5
The Remote Power Switch AB6's fuses are all located on the front side, each directly corresponding
with the power feeds in the back. Each of the unit's fuse slots accepts
up to a 10 amp GMT fuse
,
however, 10 Amp fuses are not required.
The user should choose fuses rated to fit their application and
should
not exceed 40 Amps-worth of fuses per 6-output side (A or B)
.
Fuse alarm LEDs are located above the fuses to visually indicate if any of the fuses are blown.
Additionally, from the blue
Power Control
option under the
Operation
Menus, you can operate your
power outputs and view the status of each feed as seen in section
5.4.2 Power Control (Operation)
Summary of Contents for RPS AB6
Page 6: ...2 Windows Compatibility XP Vista 7 32 64 bit RoHS 5 Approved...
Page 70: ...66...
Page 71: ......
Page 72: ......
