Doyon SRO1E, Manual

Page: 17 / 35

SROXE Nav Key 11-2014.doc 11/14
Entering the Programming mode
Press the PROGRAM KEY . If the control is protected by a password. The display reads ENTER CODE. Use the
navigation key to enter the 4 digits code. Select the number and press to go to the next number. After the last number
confirmation, you will enter program mode.
Programming a product recipe
Note : the control can hold up to 99 recipes. Each recipe can have up to 8 stages.
Use navigation key to select the desired recipe and press.
To edit a new or existing name:
Use navigation key to the edit name or option name and press .
-EDIT NAME: Use navigation key to select each letter and press to step to the next letter.
-OPTION NAME: Select one of the library listed product name.
After product name is edited, you will enter to the following recipe programming mode.
1-PREHEAT
If no preheat needed: Use the dial to step on next programming function.
If preheat needed: Use navigation key to select preheat and press .Use the dial to select YES and press . Use
navigation key to set the desire preheat temperature and press to exit and save preheat function.
2-STAGE PROGRAMMING
Use navigation key to select the product stage 1 and press . Display will show the following programming
process.
a) Set stage timer: Use navigation key to select desired current stage cooking time and press .
b) Set temperature: Use navigation key to set the current stage temperature and press .
c) Steam: If no steam is needed, press to skip steam function and go to FAN speed.
If steam is needed, rotate the dial to select YES and press . Use the dial to select SHOT or PULSE and
press . If SHOT is selected, rotate the dial to select LOW(+/- 1/2 us gallon/ 2 liter) or HIGH(+/- 1 Usgallon/4
liter) steam and press .
If a steam SHOT delay is needed, rotate the dial to set the fan off delay and press.
If pulse is selected, rotate the dial to select STD(steam every 2 minutes), HI(steam every 1 minute) or MED(steam
every 1.5 minutes) pulse and press .
d) Fan delay: If no fan delay is needed, press of the dial to skip to fan cycle. If fan delay is needed, rotate the dial to
select LOW (1 minutes) or HIGH (3 minutes) and press . If a fan off delay is needed, press to step to fan
cycle.
e) Fan Speed: If fan speed STD is ok, press . If HIGH fan speed, is desired, Use navigation key to select HIGH and
press.
You have now completed 1 stage program. If another stage is needed, select stage 2 and follow same process as
stage 1. If a 2nd stage is not needed, use navigation key to exit and the recipe will be registered.