Doyon SRO1E, Manual

Page: 15 / 35

SROXE Nav Key 11-2014.doc 11/14
You can change the fan speed. There are 2 different fan speed setting available STD & HIGH available. Default speed is
STD. To select a different fan speed then STD press on the FAN SPEED key, use navigation key to select desire fan speed
and press
.
This function will change the fan speed of the fan, creating a different air flow.
Steam output can be turned ON only if oven temperature is >= (250°F /121°C).
○
Pressing SHOT STEAM key : A single steam injection will inject for duration of preset time. The display
will toggles the recipe name and the steam. following the steam injection you will have automatically a FAN
OFF DELAY for the period of steam after steam period, the vent system will automatically evacuate steam out
of the oven and go on normal baking cycle.
□ Note: When pressing the SHOT STEAM key, it will force the fan OFF.
○ Pressing PULSE STEAM key : It will create continuous steam injections. If pressed again, it will cancel
the pulse steam function. When active, the display scrolls recipe name and pulse steam.
□ Note: When pressing the PULSE STEAM key, the fan will stay ON to create continuous moisture during the
baking cycle.
During Manual mode Only at any time vent can be open or close by pressing the vent key.
□ Note: When the SHOT STEAM sequence the vent will operate automatically.
Rack is always rotated when oven is powered, when door are opening the rack will automatically index with the door
opening and drop down to load or unload the rack. If desired Rack can be stop and index during baking by pressing the
RACK key.
To restart the rack press again on the RACK key or after opening the door and closed back the rack will start rotating in
normal mode.
FAN SPEED
STEAM FUNCTION
VENT KEY FUNCTION
RACK KEY FUNCTION