WS-2100/4100 Operating Manual
13
2.2 Installation For the Data Service.
1) PC – FWT c onnection
< Connection of terminal to a PC for the Data communication >
As shown above, connect a RS-232 cable to the Serial Port of the terminal and COM1 (or COM2)
of PC. RS 232 cable is available from the service provider, or at any electronics store.
2.3 Installing the Wall Bracket (Option)
Before finalizing the precise location of the phone, please perform the signal strength test to
ensure the best operating condition location for the assembled unit.
①
For installing the unit into a concrete wall, attach the installation sheet onto a concrete wall
and make 3mm holes with a drill at the marked location. When installing mounting screws,
do not screw them in all the way. Leave 2mm space between the screw head and the
installation sheet.
②
Assemble the Wall-Bracket by using A1~A4 (4 Places) slots on the bottom of the phone, and
then hook up B1 ~ B2 holes of the Wall-Bracket to the screw head.
Summary of Contents for WS-2100
Page 1: ...WS 2100 4100 Manual...
