WS-2100/4100 Operating Manual
28
4.5.2 Analog G3 Fax Setting
1) WS-2100/4100 support Analog G3 Fax Service using the standards below:
- IS-99/IS-707.4 based PC Fax standard
- IS-707A.7 Analog G3 Fax standard
[Note]
In case of IS-99/IS-707.4 based PC Fax standard, a service provider will require the user to decide
the fax receiving method in advance: a PC fax program or Analog G3 fax.
(The fax program or the Analog G3 Fax becomes a Default Fax Receiver)
2) In case of IS-99/IS-707.4 based PC Fax standard,
①
Enter #0*100
à
8
à
Maintenance Code
à
2
à
1 sequentially
②
Set the Default Fax Receiver
Press <1> button to receive an incoming fax through a PC fax program.
Or press <2> button to receive an incoming fax through the Analog G3 Fax machine connected to
the terminal.
③
Press <*> button to save the setting.
[Note]
The Default Fax Receiver function is system-dependent.
▶
When a Single Phone Number is used
: If a user use a single phone number for both fax and voice call, the Data Service Receiving Mode
Setting in section <3.6.1>will determine whether a voice call will be processed or a fax
transmission will be processed. In this case, Default Fax Receiver Setting does not have any
effect.
▶
When two Phone Numbers are used.
: In other words, if one number is dedicated to voice call and the other to fax despite using in the
same terminal, an incoming fax will be received automatically since fax service option is already
available. Accordingly, depending on what the Default Fax Receive setting is, the terminal receives
a fax via a PC fax program or through an Analog G3 fax machine connected to the terminal.
3) In case of IS-707A.7 Analog G3 Fax standard
①
Enter #0*100
à
8
à
Maintenance Code
à
2 sequentially
②
Press <2> button
③
Press <*> button to finish
Summary of Contents for WS-2100
Page 1: ...WS 2100 4100 Manual...
