WS-2100/4100 Operating Manual
34
4.6 System Parameter Setup
Every point on the System Parameter setup is much important enough to determine the
possibility for this terminal ’
s service. In particular, because the terminal (WS-2100/4100)
does not have the display module, there is no way to check the parameter setup procedure.
Therefore, in case of changing parameters, a careful reference on this chapter is required.
[Note] In case of changing the System Parameter, this terminal re-operates through the
power on/off by occasional necessity. This is the procedure to secure the best acquisition of
the system by changing parameters. But, for the change of A-Key and System Preference, the
terminal re-operation is not needed.
[Note] If the wrong key input was done while inputting the System Parameter, the terminal
transmits the Error tone of #1.3.9. In this case, if the handset is hung up, the previous key
input shall be discarded.
4.6.1 Phone Number (MIN) Input
This terminal features the direct MIN input by using the telephone, among system parameters.
The method of MIN input is shown below.
① Press #0*901
à
1 in order
② Enter MIN. Up to 10 digits can be input as MIN.
③ Press <*> button to finish
#0*901
à
1
à
MIN No.
à
*
If a user wants to delete the saved phone number, he or she can skip above procedure ②
and just press <*>. The procedure is as below.
#0*901
à
1
à
*
4.6.2 Directory Number Input
This method shows how to input the Mobile Directory Number into the terminal by using the
telephone.
① Press #0*901
à
2 in order
② Input MIN. Up to 10 digits can be input as MIN.
③ Press <*> bu tton to finish
Summary of Contents for WS-2100
Page 1: ...WS 2100 4100 Manual...
