NOTE:
This is an optional feature on the FSC3000.
1. Select the [Update Cards] option from the
[Utilities]
menu. After the update files are created and the
[Update Cards]
dialog box appears allowing you to select the site for update, click
[Cancel]
.
2. Connect the USB key you want use for card updates to your PC.
3. Open the shortcut (created above) to the data and locate the
[CUxxx]
file associated to the site you
expect to update, where [xxx] is the FSC3000's Phoenix site ID.
NOTE:
This Site ID must match the Site ID programmed into the FSC3000.
4. Right-click on the desired
[CUxxx]
file and select
[Cut]
from the menu.
5. Open a Windows Explorer window to the USB key and select
[Paste]
from the
[Edit]
menu.
6. Once the file is copied, remove the USB key and place it in the FSC to perform the update card.
Journal Printer Setup
Menu Option
Setting
Menu Option
Setting
Page length for tractor
11" (28 cm)
Parity
Even
Skip over perforation
Off
Data length
7-bit
Auto tear off
Off
Parallel I/F mode
Off
Auto line feed
Off
Packet mode
Off
Print direction
UNI-D
Character table
Italic
Software
ESC/p
International character set
USA
0 slash
On
Manual feed wait time
1.5 seconds
High speed draft
Off
Buzzer
Off
I/F mode
Serial
Auto CR
Off
Auto I/F wait time
10 seconds
IBM character table
Table 1
Baud rate
1200
N/A
N/A
M1700 FSC3000 Installation Manual | Dover Fueling Solutions
46