Dover OPW 12VW-AV Series Manual Download Page 15

Page: 15 / 16

WARRANTY POLICY

& RETURN PROCEDURE

H15890PAE

[email protected]

OPW STANDARD PRODUCT WARRANTY / OPW TERMS & POLICIES

Notice: OPW/PISCES

™

by OPW, Inc. products must be used in compliance with applicable federal, state, provincial, and local laws and

regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and

material to be handled. OPW/PISCES

™

by OPW, Inc. makes no warranty of fitness for a particular use. All illustrations and specifications

in this literature are based on the latest production information available at the time of publication. Prices, materials, and specifications are

subject to change at any time, and models may be discontinued at any time, in either case, without notice or obligation. For complete

OPW warranty information visit our web site at www.opw-fc.com.

OPW STANDARD PRODUCT WARRANTY OPW/PISCES

™

by OPW, Inc. warrants that products sold by it are free from defects in

materials and workmanship for a period of one year from the date of manufacture by OPW/PISCES

™

by OPW, Inc. (ECO systems two years

from date of manufacture. ECO replacement parts one year from the date of manufacture.) Proof of purchase may be required. For any

product certified to California 2001 standards*, OPW/PISCES

™

by OPW, Inc. warrants that products sold by it are free from defects in

material and workmanship for a period of one year from date of manufacture or one year from date of registration of installation, not

to exceed 15 months from date of manufacture by OPW/PISCES

™

by OPW, Inc. As the exclusive remedy under this limited warranty,

OPW/PISCES

™

by OPW, Inc. will, at its sole discretion, repair, replace, or issue credit for future orders for any product that may prove

defective within the one year date of manufacture period (repairs, replacements, or credits may be subject to prorated warranty for remainder

of the original warranty period; complete proper warranty claim documentation required).

PISCES

™

by OPW, Inc. further guarantees that all PISCES

™

primary pipe is free from defects in materials and workmanship for a period

of ten (10) years from the date of manufacture. Any PISCES

™

primary pipe proven to be defective in materials or workmanship within said

10-year period will, at PISCES

™

option, be repaired or replaced, or credit will be given for future orders. PISCES

™

will bear the reasonable

labor costs associated with the repair or replacement of non-conforming PISCES

™

primary pipe when such pipe has been used exclusively

in a complete PISCES

™

Retractable System. Any defect will be corrected promptly upon written notification to PISCES

™

by OPW, Inc. at

P.O. Box 405003 Cincinnati, Ohio 45240, attention Rick Jones.

This warranty shall not apply to any product that has been altered in any way, which has been repaired by any other than a service

representative authorized by OPW/PISCES

™

by OPW, Inc., or when failure is due to misuse, improper installation or maintenance.

OPW/PISCES

™

by OPW, Inc. shall have no liability whatsoever for special, incidental, or consequential damages to any party, and shall

have no liability for the cost of labor, freight, excavation, clean-up, downtime, removal, reinstallation, loss of profit, or any other cost or

charges. *Products certified to the California 2001 standards will have an OPW registration card enclosed/attached to the product.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND SPECIFICALLY THE WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND

BEYOND THE DESCRIPTION ON THE FACE HEREOF.

If product must be returned during warranty period, please contact an authorized OPW distributor.

Please see OPW’s website for instructions in other languages, troubleshooting guides, how to use the nozzle and the

Do’s and Dont’s At The Gas Pump video: www.opw-fc.com

Delaware Capital Formation, Inc., a wholly-owned subsidiary of Dover Corporation.

PRINTED IN USA

9393 Princeton-Glendale Road

P.O. Box 405003

Cincinnati, Ohio 45240-5003

FRONT

BACK

North America Toll Free

–

TELEPHONE: (800) 422-2525

✦

Fax: (800) 421-3297

✦

Email: domestic [email protected]

International

–

TELEPHONE: (513) 870-3315

(513) 870-3261

✦

Fax: (513) 870-3157

✦

Email: [email protected]

www.opw-fc.com

• If a nozzle must be replaced during warranty period,

please contact an authorized OPW distributor.

• Warranty does not cover:

•Evidence of misuse or abuse. Damaged nozzles are

not warrantable.

•Wear items such as spouts, splash guards or hand

insulators are not covered under warranty.

•Nozzles with missing parts or components are

not warrantable.

•Evidence of repair or rebuild by others are not

warrantable.

• The following information will need to

be provided to your OPW distributor:
• Serial number of the nozzle being returned.
• Serial number and model number of the

replacement nozzle.

• OPW also provides orange warranty tags to

fill out this information.

• OPW prorates all warranty returns. The

replacement nozzle only takes on the

remaining warranty of the original nozzle.

79958_Vrs 3.indd 12

8/5/05 3:23:02 PM

SEPTEMBER 2010

Figure 18

(Ilustración 18)

Figure 17

(Ilustración 17)

Figure 16

(Ilustración 16)

Figure 15

(Ilustración 15)

INSTALLATIONS

INSTALACIÓNES

H15890PAE

[email protected]

• For a new facility installation, purge/flush hose point

before installing nozzles. If nozzles are used to
purge/flush system, this could result in foreign material
in nozzle’s main valve and cause a nozzle not to shut off.

• DO NOT use pipe sealant on vapor recovery hanging

hardware. Do not use plastic or teflon tape.

• Verify that o-rings are present on hose and not torn or

damaged. Coat o-rings with light oil for installation to
prevent damage.

(See Figure 15)

• Insert hose into inlet of nozzle. A slight push is required to

seat the inner hose into the nozzle body.

(See Figure 16)

• Engage the external thread into the nozzle body,and

tighten the hose nut per hose instructions. Refer to
UL567 (50 foot-pounds).

(See Figure 17)

DO NOT OVER-TIGHTEN

• Flow test nozzles before putting nozzles in service.

See testing instructions.

(Reference page 7)

• Check continuity. See testing instructions.

(Reference page 7)

• Check for leaks between all connections of hanging

hardware. Repair or replace, as required, if any leaks
are found.

• Dispenser modifications may be necessary for

proper nozzle storage. Always comply with the
dispenser instructions and local codes.

• After installation of the nozzle, remove the registration tag

if attached to nozzle. Facility management must complete
the registration tag and return to OPW. Keep the receipt
of the registration tag for your records. You may either
mail the completed registration tag to OPW or register
online at www.opw-fc.com. (

See Figure 18

)

Please see OPW’s website:

www.opw-fc.com for further information

O N E C O M P A N Y . O N E W O R L D . O N E S O U R C E .

™

• En instalaciones nuevas,purgue la punta de la manguera antes

de instalar la pistola.Si se utilizan pistolas para purgar el sistema,
podrían ingresar materiales extraños a la válvula principal de la
pistola e impedir que la pistola se cierre.

• NO use sellador de tuberías en las piezas que cuelgan del

recuperador de vapor. No utilice cinta plástica ni de teflón.

• Verifique la presencia de o-rings en la manguera,y que no estén

gastadas ni dañadas. Para instalarlas, recubra (los o

rings) con

aceite liviano para evitar dañarlos.

(Vea la ilustración 15)

• Inserte la manguera en el orificio de entrada de la pistola

surtidora. Debe presionar suavemente para fijar la manguera
interna dentro del cuerpo de la pistola.

(Vea la ilustración 16)

• Inserte la rosca externa en el cuerpo de la pistola surtidora y

ajuste la tuerca de la manguera según lo indican las
instrucciones de la manguera. Consulte UL567 (50 pies-libras).

(Vea la ilustración 17)

NO AJUSTE EN EXCESO

• Pruebe las pistolas antes de ponerlas en servicio. Consulte las

instrucciones para realizar la prueba.

(Referencia página 7)

• Controle la continuidad del caudal.Consulte las instrucciones

para realizar la prueba.

(Referencia página 7)

• Controle que no haya pérdidas entre todas las conexiones de

las piezas que cuelgan.Repare o reemplace,según sea
necesario,si encuentra pérdidas.

• Es posible que sea necesario realizar modificaciones al surtidor

para guardar correctamente la pistola. Siempre cumpla las
instrucciones del surtidor y los códigos locales.

• Retire la etiqueta de registro sujeta a la pistola después de

instalarla.El encargado de las instalaciones debe completar la
etiqueta de registro y devolverla a OPW. Conserve el recibo
de la etiqueta para registro. Puede enviar la etiqueta completa
por correo a OPW o registrarse en línea en www.opw-fc.com.

(Vea la ilustración 18)

79958_Vrs 3.indd 5

8/5/05 3:22:03 PM

SEPTEMBER 2010

IMPORTANT SAFEGUARDS

• For your protection, please read these

safety instructions completely before
installing and operating this equipment.

• Keep this manual on file for future

reference.

• This manual contains material that may

be required by authorities having
jurisdiction to be on site at all times.

• Carefully observe all warnings,