Dover Imaje S7 Mega, Manual

Page: 42 / 154

40 A19620 C
Use of the Terminal
4.2.3 Bolderization
This function is used to print characters you want to stand out in the message in bold, without
changing their height. A dialog box asks you to enter the bolderization coefficient required.
Coefficients are from 1 to 9, with 9 giving the boldest print (the default value is 1). From now on,
all the symbols selected will be written on the screen with the bolderization factors chosen
incorporated (what you see on the screen is what you get on the print-out).
4.2.4 Tabulation
This function is used for defining a blank space between two characters or symbols which are not
the same as the standard space in the font used. The space normally has the same width as a
standard character, but with this command you can set the width yourself (1 to 255 points).
Insertion is performed in the trame mode (select with the
i
key) using the
m
key.
S7 MESSAGE EDITING FRANCE N : 001
Message Font Variables
Parameters
Bolderization capture
VALID / EXIT : to quit
Bolderization: 5