Dover Imaje S7 Mega, Manual

Page: 24 / 154

22 A19620 C
Use of the Terminal
ka
and
kb
These key combinations are used to adjust the contrast of the display.
o K
Does not apply to the standard terminal.
These keys change from the Latin alphabet to Chinese, Arabic or
Hebrew characters and vice versa.
In non-Latin character mode a pictogram is displayed in the help zone.
Example :in the case of an Arabic terminal, in Arabic character mode:
.
i
a) In MESSAGE EDITING mode, this key is used for toggling
between character and trame modes. In trame mode, a symbol is
shown at the bottom right of the screen .
In trame mode:
• Pressing the
m
key inserts tabulations. These tabulations
are composed of a number of trames programmed in the
MESSAGE EDITING menu, under the Font, Tabulation function.
When the cursor is placed in front of a tabulation, the help zone
shows "tabulation x" where x is the number of trames for this
tabulation. Trames can be inserted one by one by pressing the
d
key, and can be deleted by pressing the
c
key.
The cursor can be moved one point upwards towards the top of the
message by pressing the
a
key, and one point downwards by
pressing the
b
key. The lines of the message therefore do not
have a fixed position as is shown on the example below.
This trame mode cannot be used with rapid multiline algorithms.
In character mode:
Normal editing mode conditions apply, and pressing the arrow keys
moves the cursor character by character and line by line.
b) This key is also used for making choices in the various dialog boxes
which you will come across while using the printer. In this respect,
the
m
key serves the same purpose.
ε
A
LINE
DOT
DOT
PER
POSITIONING