Double Dome PTZPZ9, Installation Manual

Page: 47 / 53

44
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose
【
ALARMS SETUP
】
item, press
【
OPEN
】
for confirm and enter alarm set items.
3. Under
【
ALARMS SETUP
】
choose
【
INPUT M ODE
】
item, press
【
OPEN
】
for confirm. Left/right P/T to choose open or close .
4. Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
exit
directly.

ALARM LINKAGE
It is used to set whether executing some linkage special functions set
preliminary when alarmed or not. E.g., 1-4 auto scan
，
1-200 preset
point
，
1-4 patrol
，
1-4 mode route.

Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose
【
ALARMS SETUP
】
item, press
【
OPEN
】
for confirm and enter alarm set items
3. Under
【
ALARMS SETUP
】
choose
【
ALARM LINKAGE
】
item,
press
【
OPEN
】
for confirm.
4. Left/right P/T to change alarm function linkage, 1-4 auto scan
，
1-200 preset point
，
1-4 patrol
，
1-4 mode route are selectable.
5. Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
exit
directly.

RELAY OUTPUT
To set whether it can link the relay of the alarm output after alarmed or
not.

Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose
【
ALARMS SETUP
】
item, press
【
OPEN
】
for confirm and enter alarm set items.
3. Under
【
ALARMS SETUP
】
choose
【
RELAY OUTPUT
】
item,
press
【
OPEN
】
for confirm.
4. Left/right P/T to open or close relay output.
5. Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
exit