43
Support 4 input alarm lines and 2 output alarm line. Alarm switch input,
can edit settings menu for each separate road linkage alarm and alarm
output ports in the dome, and each specific way editing in the same
method. When the alarm sounds, the dome will do the followings:
Executive linkage features, the linkage must be preservation of
corresponding feature set. If the alarm is activated on the 3
rd
,
linkage function set is the 2nd preset, then the dome will
immediately go to the 2nd preset for surveillance.
Alarm output channel output alarm switch, start external alarm
equipment to work.
Automatic alarm priority system (1st is the highest-priority the 4
th
is the lowest-priority).
Dome will automatically in accordance with its high and low
priority to receive alarm signal at the same time. The alarm input
could be set either open or close, about the details please refer to
the jumper setting section.
ALARMS SETUP
Operations:
1.
Call preset point 95 to enter main menu.
2.
Up/Down cursor to choose
【
ALARMS SETUP
】
item, press
【
OPEN
】
for confirm and enter alarm set items.
3.
Under
【
ALARMS SETUP
】
choose
【
ALARM ACTION
】
item,
press
【
OPEN
】
for confirm.
4.
Left/right P/T to choose arming/disarming the alarm function.
5. Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
exit
directly.
INPUT MODE
Setting Methods:
NC: Alarm input OFF on normal, cause input signal when disclosed.
NO: Alarm input disclosed on normal, cause input signal when on OFF”.
Operations:
Summary of Contents for PTZPZ9
Page 13: ...10 DIP Switch Settings Baud rate Setting SW2 B7 B8 Protocol Setting SW2 B1 B6...
Page 14: ...11 Address Setting SW1...
Page 15: ...12...
Page 16: ...13...
