DOTWORKZ D2 COOLDOME, Product Instructions

Page: 14 / 31

13
Installing Camera Bracket
Panasonic
BB-HCM381/
580/581 & KX-HMC280
1. Install the Panasonic camera onto the D2
Camera Bracket center hole with (1) .25"-20
3/8" Long Bolt, and (1) .25" Lock Washer that
are included.
2. The Panasonic camera requires a 2.0"
spacing for optimal fit and operation. Use (1)
1.5" standoff and (1) .5" standoff that are
provided to create a
2.0" standoff. You will
need to create 4 of these with the included
hardware.
Required components (see component
checklist): Part# 1,2,3,5,6,7,& 8
3. The 2.0" standoffs will be inserted on
the lower lens portion of the D2.
1.5" .5"
4. Now slide the camera bracket with the
camera into place to line up with 4 screws
from the standoffs.
5. Secure the plate by using (4) .75"
standoffs to lock the bracket in place. The
two front location will require the use of (2)
.25" washer.
This edge nests in arch at front of D2
This edge of the bracket faces back of the D2 enclosure
Picture represents standoff location & orientation.
Height of standoffs will vary depending on camera used.
Picture represents came br t orientation & how it is
secured. Don’t’ forget to mount your camera to the D2
camera bracket based on instructions.