DOTWORKZ D2 COOLDOME, Product Instructions

Page: 6 / 31

5
5.25" H 6.16" H 7.12" H 9.13" H
Upper D2 Dome Section Lower Lens Section
For Lower D2 Section
9.375"
max
For Upper D2 Section
6.375"
The D2 Enclosure series are designed and engineered for today’s most popular standard IP based PTZ
cameras. The combination of standoff spacing and camera bracket allows our customers to tailor the D2
Enclosure series to their specific camera needs. We have provided the necessary tools for customization with all
of our D2 Enclosure series.
The D2 Enclosure series can accommodate mini-domes and PTZ cameras as tall as 9.375 inches in height. Our
standoff combination includes supported heights of
0.50",0.75",1.00", 1.25", 1.50", 1.75", 2.00", 2.25", 2.50",
2.75", 3.00", and 3.75" . These standoff heights can be applied to upper and lower mount locations based on the
height of your camera. Most cameras will often utilize a center screw hole for securing the camera onto the plate.
If your camera has other mounting capabilities, then
center the camera on our camera bracket and check to
see if it aligns with any of the pre-made holes on the
camera bracket. If it does, great you can use the pre-
made holes. If it doesn’t, you can mark the holes needed
and drill them into the camera plate (steel plate).
For power, all of our D2 Environmental Enclosure Series
come standard with a 12VDC Barrel plug with a center
pin. If you camera does not support this, then check our
section on Camera Power Setup (NON-STANDARD
CONNECTOR) for details.
Generic Camera Installation
Height Example
3.7" H