Dot-Spot brilliance-midi, Operator'S Manual

Page: 20 / 28

Configurations
Safety
Intended use
The recessed spots brilliance-midi (narrow) , brilliance-mini and dome-spot are intended for fixed
floor, wall and ceiling installation. They are suitable for effect lighting as well as pathway and mark -
ing lights. They are designed for operating in moderate climatic zones and under water (brilliance
mini/midi, depth 1 m). They do not comply with the requirements of spots being driven over by mo-
tor vehicles according to DIN EN 60598-2-13, section 13.6.2. It does not comply with the standard
„Particular requirements - Luminaires for swimming pools and similar applications” EN 60598-2-
18. The spot is meant for operating with protective low voltage. In case of detailed lighting planning,
please request the light distribution curves (LDC).
Note on the installation to be carried by an expert
The installation may only be carried out by appropriately trained professionals.
Safety instructions
During installation, the relative safety regulations have to be followed. The spots are oper-
ated with protective low voltage. To avoid danger and failures, prior or any work at the spot
or installation, disconnect the power supply from the mains. The spot can’t be opened.
Connect the spot only to power supplies with the appropriate output voltage. A wrong voltage may
destroy the spot and the power supply.
Observe the installation manual of the power supply. Do not overload the power supply! The overall
power consumed by all consumers connected to the power supply should be approx. 10% lower
than the rated power of the power supply being used.
In order to protect the exposed connection cable from rodents it should be protected against mar-
tens (see installation accessories).
20
en
Connection
Order
number
brilliance-midi
(narrow)
3 Watt
brilliance-mini
1 Watt
dome-spot
1 Watt
dome-spot,
narrow IP 67 /
brilliance-mini,
brilliance-midi
IP 68
5 m with open
cable end
.33
  
10 m with open
cable end
.34
  
0.3 m with M12
plug
.41
  
IP 67 for M12
plug system
5 m with M12
plug
.42
  