Mixing hot liquids
Continuous speed MIN-MAX
NOTE! Please note that the blender must not be started up with only dry ingredients inside
(e.g. nuts), as this may break the appliance. Always add a splash of liquid before starting
the blender.
The glass jug can tolerate hot ingredients and liquids/soups. When hot liquids are added to a
closed container (e.g. a blender jug with lid), high pressure forms automatically. There is a risk,
therefore, that the lid will fly off during use and hot liquid will spray out. To avoid this,
do the following:
If, despite everything, the blender is turned off during the above process and needs to be
restarted, keep one hand on the lid – using a towel/pot holder or similar – and watch out
for any splashes of hot liquid. It is only hot liquid that must not be mixed because the
pressure in the jug gets too high.
IMPORTANT! We do not recommend mixing frozen berries/fruits
on their own, as they can easily freeze into a lump and then
block the blades.
1. The temperature of the liquid to be added should not exceed 65°C.
2. Fill the jug no more than half full with the desired ingredients
(such as vegetables, root vegetables, etc.)
3. Start the blender on the Fruit/vegetable programme and then slowly pour the liquid
(hot stock, cream, or similar) through the hole in the lid. Do not switch the blender off while
doing this. If the blender is switched off with hot liquid in it, and is then restarted, pressure
may form from the bottom due to the high speed of the motor, causing the lid to fly off
and hot liquid to splash out.
Once a programme has ended, turn the blender off and turn the function dial back to 0.
It is recommended that you try various speeds to work out what is best for the ingredients
you are mixing. Always keep an eye on the mixing process and switch the appliance off
once the required results have been reached. Always unplug the appliance after use.
The blender must not be used for more than 3 minutes at a time. Then leave the blender to
rest for 1 minute before restarting it (to avoid overheating).
Never remove the glass jug from the appliance when the motor is running.
The blender has continuous speed adjustment. Start at a low speed and gradually
increase as required. Turn the function dial to the desired speed and start the
mixing process using the START/STOP button. Switch the blender off by turning
the function dial back to 0 or pressing the START/STOP button.
4
