4K60Hz HDMI KVM extender
over Cat6 w/ USB 2.0 70M
•
Important Safety Notice
1. Do not mix up HDMI to RJ45 transmitter to HDMI reciever
before installation.
2. Do not hot plug when it is working.
3. Use DC5V/2A power supply only. Make sure specification
matched if using adapters.
4. Static electricity will cause damage of the device, please do
ESD protection when using the device.
•
Introduction
The KanexPro EXT-HDMIKVM70M HDMI extender kit features a
transmitter and receiver combo which allows for high quality
4K@60Hz video and audio to be transmitted up to 70 meters over
a single Cat6/6a network cable. The KVM feature in this kit also
transmits USB 2.0 signals which can be used to control both a
keyboard and a mouse.
•
Features
1. Zero Latency.
2. 4K@60HZ HDMI signal can be transmitted 70 meters
through a CAT6/6A/7 network cable.
3. The receiver can extract the digital audio from the
transmitter through the S/PDIF port.
4. Supports audio formats (LPCM/DTS-HD/DTS-Audio/
Dolby Digital 5.1CH).
5. Supports HDR (YUV 4:4:4), EDID passback.
6. Transmitter support one HDMI loop-out.
7. Support bi-directional IR passback function (20~60KHz).
8. Lightning Protection, Surge Protection, ESD Protection.
•
Package Contents
1. 1x Transmitter Unit
2. 1x Receiver Unit
3. 2x DC5V/2A power supply
4. 1x USB Cable
5. 1x User Manual
6. 8x Mounting Brackets
7. 18x Screw
•
Installation Requirements
1. HDMI source device (compute graphics card, DVD, PS3),
HD monitoring equipment.
2. HDMI display device like SDTV, HDTV, projector with
HDMI port.
3. UTP/STP CAT6/CAT6A/CAT7 cable. Follow standard
IEEE-568B, It is recommended to select a network cable
with less loss and crosstalk.
•
Interfaces
1. 1x Transmitter (TX)
2
. 1x Receiver (RX)
1
2
3
4
1
5
6
7
8
5
6
7
9
2
3
4
1
2
3
4
1
RESET BUTTON
Press to restart the device
When there is power and no HDMI signal, the
indicator will flash, when there is HDMI signal,
the indicator will light solid blue
Connect with network cable
RJ45 SIGNAL OUTPUT
Connect with DC5V-12V power adapter
DC5V-12V INPUT
Connect with HDMI display device
HDMI OUTPUT
Connect with HDMI source device
HDMI INPUT
Connect with Computer
USB-A Port
POWER/SIGNAL
INDICATOR
Connected to the computer, indicator light is on;
No signal transmission, the indicator light is off;
This is the signal transmission, the indicator light
flashes
KVM Light
When there is power and no HDMI signal, the
indicator will flash, when there is HDMI signal,
the indicator will light solid blue
POWER/SIGNAL
INDICATOR
2
3
4
5
6
7
8
1
RESET BUTTON
Press to restart the device
KVM Light
The mouse/keyboard is connected to the USB
port, the indicator light is on
Output digital audio signal
Connect with Keyboard and mouse
Connect with network cable
RJ45 SIGNAL OUTPUT
S/PDIF OUT
USB-A port
2
3
4
5
6
7
8
Connect with DC5V-12V power adapter
DC5V-12V INPUT
Connect with HDMI display device
HDMI OUTPUT
MPN: EXT-HDMIKVM70M
